What's in the toolboxes?  
                                                                                                    Previous Page        HOME         Next Page
                     ENGINE TOOLBOX
    £10.00       CIT2CV003  TIMING TOOL
    £50.00     CIT2CV041  IGNITION ADVANCE GAUGE Special order only
    £74.00     CIT2CV023  PISTON RING COMPRESSOR
    £60.00     CIT2CV032  ENGINE SUPPORT STAND NOT AVAILABLE
    £28.00     CIT2CV024  OIL COOLER UNION SOCKET
    £37.00     CIT2CV026  PISTON PIN EXTRACTOR
    £27.60     CIT2CV035  CONNECTING ROD BUSH EXTRACTOR SPECIAL ORDER ONLY
    £18.50     CIT2CV036  FAN REMOVAL DRIFT
    £20.00     CIT2CV037  TAPPET SECURING BOLT TOOL
    £24.00     CIT2CV038  VALVE COMPRESSOR [OLD TYPE] NOT AVAILABLE
   £53.00      CIT2CV064 VALVE SPRING COMPRESSOR [NEW TYPE]
    £43.00     CIT2CV042  ADJUSTABLE CYLINDER HEAD STAND
    £56.50     CIT2CV028  CYLINDER HEAD LAPPING TOOL
    £29,00     CIT2CV030  12MM CARBURETTOR SPANNER
    £28.00     CIT2CV044  DYNAMO PULLER, EXTRACTOR BOLT
   £36.40      CIT2CV067  FLYWHEEL SPIGOT BUSH/BEARING EXTRACTOR AND INSERTION DRIFT NOT AVAILABLE


TRANSMISSION AND GEARBOX TOOLBOX

  £60.00     CIT2CV031  GEARBOX SUPPORT STAND NOT AVAILABLE
  £20.00     CIT2CV012  SOCKET FOR SELECTOR SCREWS
  £46.00     CIT2CV015  SYNCHROMESH SET UP SHIMS NOT AVAILABLE
  £32.00     CIT2CV016  SELECTOR SHAFT INDENT SPRING TOOL
  £50.00     CIT2CV043  OUTPUT HUB SPECIAL SOCKET


WHEELS AND STEERING TOOLBOX

  £107.00     CIT2CV065  REAR WHEEL BEARING RING NUT EXTRACTOR [35MM]
  £90.00     CIT2CV001  WHEEL BEARING RING NUT EXTRACTOR [35MM]
  £93.00     CIT2CV002  WHEEL BEARING RING NUT EXTRACTOR [36MM]
  £30.00     CIT2CV005  FRONT HUB SEPARATOR DRIFT
  £48.00     CIT2CV007  LEVER FOR STEERING COLUMN
  £50.00     CIT2CV008  KING PIN DRIFT SET [4 TOOLS]
  £64.00     CIT2CV009  KING PIN BUSH ALIGNMENT TOOLS [2 TOOLS]
  £45.00     CIT2CV017  STEERING PINION RING NUT EXTRACTOR
  £17.00       CIT2CV020  TRACK ROD END CUP NUT TOOL [ INNER AND OUTER]
  £75.00     CIT2CV045  INNER BALL JOINT SEPARATOR
  £38.40     CIT2CV046  PHOSPHOR BRONZE TRACK ROD END CUPS [4 IN SET] NOT AVAILABLE, DISCONTINUED
  £22.40     CIT2CV025  FRONT HUB LOCKING BAR
  £25.00     CIT2CV047  SKF DOUBLE BALL WHEEL BEARINGS [ 1 PIECE TYPE] NOT SOLD, DISCONTINUED
  £30.00     CIT2CV029  DOLLY AND DRIFT SET FOR KING PIN TOP PLUG
  £36.00     CIT2CV048  CAMBER ANGLE MEASURING DEVICE [DETECTS  BENT  AXLE ARMS] DISCONTINUED
   £50.00    CIT2CV066  SCREW PULLER FOR THE FRONT HUB AND WHEEL BEARING [ASSEMBLY TOOL]
  £32.00     CIT2CV061  TAP FOR DAMAGED OR RUSTY OUTER TRACK ROD HOUSING
  £32.00     CIT2CV062   TAP FOR LOWER SCREW PLUG ON KING PIN HOUSING
  £40.00     CIT2CV033  PHOSPHOR BRONZE TRACK ROD END CUPS [4 IN SET] DISCONTINUED





BRAKE SYSTEM TOOLBOX

£80.00      CIT2CV010  2CV REAR BRAKE CENTRALISER [35MM]
£80.00      CIT2CV011   ACADIANE REAR BRAKE CENTRALISER [36MM]
£57.00      CIT2CV013  FRONT BRAKE CENTRALISER [200 AND 220MM]
£18.00        CIT2CV014  MASTER CYLINDER ASSEMBLY TOOL
£20.00      CIT2CV019  HANDBRAKE ECCENTRIC ADJUSTER TOOL
£46.00      CIT2CV021  REAR HUB NUT 44MM SOCKET
£45.00      CIT2CV022  REAR BRAKE DRUM PULLER
£60.00      CIT2CV049  REAR BRAKE DRUM SKIMMING MANDREL DISCONTINUED
£11.50        CIT2CV050  CALIPER PISTON RETRACTING TOOL DISCONTINUED
£7.00        CIT2CV051  BRAKE PAD RETAINING SPRING TOOL DISCONTINUED
£100.00      CIT2CV052  RECONDITIONED BRAKE CALIPERS [ EXCHANGE ONLY] DISCONTINUED



CLUTCH AND FLYWHEEL TOOLBOX

£32.00     CIT2CV053   CLUTCH CENTRALISER [2 SIZES ON THIS TOOL]
£20.00       CIT2CV054  16MM LEFT HAND THREAD SECURING NUT FOR CENTRIFUGAL CLUTCH
£44.00     CIT2CV055   FLYWHEEL LIGHTENING MANDREL NOT AVAILABLE, DISCONTINUED
£69.00     CIT2CV056   CENTRIFUGAL CLUTCH DRUM SKIMMING MANDREL NOT AVAILABLE, DISCONTINUED
£27.00     CIT2CV067   FLYWHEEL SPIGOT BUSH/BEARING EXTRACTOR AND INSERTION DRIFT NOT AVAILABLE, DISCONTINUED


AXLES AND SUSPENSION TOOLBOX

 £70.00     CIT2CV057  JIG AND SETTING BAR FOR RE-SETTING FRICTION DAMPERS [2 TOOLS] SPECIAL ORDER ONLY
 £30.00     CIT2CV058   FRICTION DAMPER REMOVAL/INSERTING TOOL
 £70.00     CIT2CV004  AXLE ARM 16 SLOT BEARING  RETAINING NUT SOCKET
 £50.00     CIT2CV018  AXLE BEARING TUBE DRIFT
 £78.00     CIT2CV027  AXLE INNER BEARING PULLER SET
 £22.00       CIT2CV040  SUSPENSION TIE ROD ADJUSTER  [24MM HEX BAR]
 £35.00     CIT2CV059  SPANNERS FOR CANNISTERS DISCONTINUED  [2 SIZES]
£32.00      CIT2CV060  DIE NUT FOR SUSPENSION TIE ROD THREADS.
 £32.00     CIT2CV063  TAP FOR CLEANING UP THE INTERNAL THREADS ON EYE BOLT FOR TIE ROD.



                                     grstools@yahoo.co.uk