<< tool list
cit2cv060
price
£38.00
+
post
|
die nut for the suspension tie rod threads
11mm x 1.00mm
This is a split type die, held in an adapter handle,
solid hexagon die nuts are not advisable for use.
The tie rod thread is a rolled thread and is therefore slightly bigger then a standard thread. Using a hexagonal die nut will cut metal off the tie rod, so by using a split die, you can open the die to the correct width to be able to clean up the threads. If metal is removed from the thread, then, it could be looser in the eye bolt, which could lead to failure.
|